Options For Filtering Your Tap Water Without Having To Install A Faucet Filter

Installing a faucet filter is difficult for many people, especially for those who are not particularly fond of do-it-yourself projects because of the overwhelming amount of time that they require, as well as the possibility that things could go wrong and you could damage the faucet. However, you might have a very strong need to filter your water before drinking it or using it to wash your dishes. If you don't have the money to pay for a professional to install your water filter, here are some steps that you can take in the meantime to make sure that the water you are drinking is clean and free of extra minerals.

1. Use a Portable Filter for Drinking Water

Your first option is to go to a home goods store and purchase a filtered jug or pitcher that you can keep in the refrigerator. This will solve the problem of not having an installed filter for drinking water. To use a portable filter, all you need to do is fill the top part of it with water. The carbon filter that's in the pitcher or jug will filter out any chemicals or minerals that might be in the water. The water will fall to the bottom of the pitcher or jug, where you will be able to access it as drinking water. Clear out a section of your refrigerator and place the pitcher or jug near the front so you will always have easy access to cold water all the time.

2. Use a Filtered Nozzle

If you have a stretch nozzle that you can detach and use to spray water on your dishes in the sink, then you can purchase a new nozzle that is already filtered. Go to a hardware store and purchase a nozzle with the filter. Then, loosen the screws in your old nozzle and remove it by unscrewing it. Screw the new nozzle back into place and screw it so that it is fixed. This will allow you to wash your dishes without having to worry about filtering the water.

3. Use a Filtered Faucet Plug

Finally, you can purchase a plug that goes over the faucet that will be able to filter some of the bacteria, chemicals, and minerals in the water. It doesn't take any tools to install it. You just need to put it over the end of the faucet and tighten the adjustable harness.

For more information, visit http://valleypumpnw.com or a similar website.


Share